Closet Pantry Conversion Made Easy

If you need more space to store your goods dry and small kitchens, and consider building a storage locker. This project will transform an area is rarely used, or to the additional storage space for use. This shift requires some work, but do it yourselfer can finish working with wood and some basic knowledge of common tools.
Materials needed

* The system store - before you start, you have an idea of what kind of warehouse system will meet your needs. There are many available before the assembled systems, or there could be a custom shelving built to fit your space.
* A source of light
Saw * Power Tools - table, circular saw, sander, cordless drill, stud finder
* Hand tools - a tape measure, screwdriver
* Fasteners - screws, wood, glue wood, drywall anchors

Start

Regardless of the type of cabinet you are going to store what you do, you'll have to clean the cabinet you are using. Remove all items inside the cabin, the current shelving unit.

Once everything is removed, clean the closet full of water and soap. Get rid of the space or the floor, and paint the walls and ceiling.
Lighting

A store cupboard in need of adequate lighting. If you already have the nearest source of light then you can skip this section. Also, depending on your level of knowledge with the electrical wiring, you may want to consider having a licensed electrician install the light of the closet to you.

Locate the junction box in which you can connect your wiring. Cut a hole in the roof of a room and fish wires down the wall to the junction box. Cable electrical wire connectors work.

Cut a small hole in the wall inside the store for the light switch. Installing and connecting wires to switch to the power supply to fixture and light weapons. Install light fixture.
Install the system stored

Many people go with the wire rack rack system infrastructure. This can be easily installed in a closet in the store within hours. However, others like the look of wood and a custom shelving unit.
Install the basic

1. Measuring store cupboard to determine the volume of material that will be used.
2. Make the cuts necessary, according to your measurements. Some systems store already before the adoption so that they can easily fit or modified.
3. And included the use of devices to install shelves wire or other system.
4. Found on the buttons of the wall and screw the mounting brackets. Maintain the standard of everything, and then install the shelving units.

Extra storage

Even if you have a pre-made shelving, keep in mind that there are additional ways to store your items. Consideration of the boxes that can be installed on shelves or hang under the shelves over in transport through the narrow door of the elements, such as spices, or individual packages.